|
 |
| |
|
| The Machine is Built of Heavy duty cast iron with high Grade cast iron bese hand Scraped to fine tolerance to Achieve highest Accuracy. Designe Make Easy Movement of table Slide. By Proviing V-ways and flat ways duly hand Scraped to fine Tolerance to Achieve Highest Accuracy. |
| |
|
| The Grinding Wheel spindle is hardened & Grounded. The Spindle Runs in Precision angular Contact Bearings and driven by flange Mounted Motor though Flexible Couplings, Ensuring through Free Service for a long life. |
| |
|
| Vertical Grinding wheel Slide Movement down at right side in the body. The Vertical wheel dial least count in 0.01 mm. and Micro feed least count un 0.002 mm. |
| |
|
| Working Surface of the table |
225 x 450 mm |
300 x 600 mm |
| Maximum Height from table to Grinding Wheel |
275 mm |
275 mm |
| Vertical feed Leastcount |
0.01 mm |
0.01 mm |
| Microfeed Leastcount |
0.002 mm |
0.002 mm |
| Cross Feed Leastcount |
0.05 mm |
0.05 mm |
| Spindle Speed |
2800 RPM |
2800 RPM |
| Size of Grinding Wheel ( Dia x Width x Bore ) |
200 x 13 x 31.75 mm |
200 x 20 x 31.75 mm |
| Magnetic Chuck Recommended |
200 x 450 mm |
250 x 500 mm |
| Electric Motor Recommended |
75K.W. 3 Phase
1 HP 2800 RPM |
1.5K.W. 3 PH
2 HP 2800 RPM |
| App. Net Weight |
|
|
|
| |
Standard Accessories:
- Balancing Stand & Mandrel
- Diamond Dressor
- Lubrication Pump
- Toolkit
- One - Grinding Wheel with Flange
|
Optional Accessories:
- Permanent magnetic chuck
- Coolant equipment
- Machine lamp ( 230 v AC )
- Wheel flange unit
|
|
| |
| Note: As improvement are made from time to time. These specifications are subject to change without notice and are not binding on us. inspection at our sight before delivery. |
