| AMAR - 0........................ |
(1675 mm) |
| AMAR - 1............................................ |
(2130 mm) |
| AMAR - 2.............................................. |
(2740 mm) |
| AMAR - 3............................................... |
(3050 mm) |
| AMAR - 4........................................... |
(3650 mm) |
| Height of Centre Over flat bed Ways........................... |
255 mm |
| Max Sawing over bed........................................ |
480 mm |
| Max Sawing over Cross Slide................................... |
285 mm |
| Max Sawing in gap......................... |
785 mm |
| Length of grap in front of face plate.......................... |
200 mm |
| Cross Slide Travel............................ |
270 mm |
| Compound Slide Travel............................. |
150 mm |
| Admit Between Centre |
| AMAR - 0.............................. |
500 mm |
| AMAR - 1................................... |
965 mm |
| AMAR - 2..................................... |
1575 mm |
| AMAR - 3................................. |
1905 mm |
| AMAR - 4................................... |
2515 mm |
|
| Spindle Nose Dia/Threads......................... |
74.3 x 6 TPI |
| Spindle Bore....................... |
52 mm |
| Taper Bore In Spindle.................... |
MT-6 |
| No. of Spindle Speed...................... |
8 |
| Range of Spindle R.P.M.......................................... |
30 to 550 R.P.M. |
| Range of Spindle Diameter................................ |
50 mm. |
| Tail Stock Spindle Travel................................ |
180 mm. |
| Tail Stock Spindle Morse Taper........................... |
MT-4 |
| Lead Screw Dia / Threads....................... |
38 mm x 4 TPI |
| No. of threads and pitch rang : |
Metric...................................13 (1 to 6 pitch |
| Inch......................................19 (2 to 24 TPI) |
|
| V-Belt................................................ |
B - 73 |
| Flat Belt........................................ |
50 x 1900 mm |
| Electric Motor....................... |
3 - H P |
